Configure a Circuitless IPv4 Interface
About this task
You can use a circuitless IPv4 (CLIPv4) interface to provide uninterrupted connectivity to your system.
Procedure
- In the navigation pane, expand .
- Select IP.
- Select the Circuitless IP tab.
- Select Insert.
- In the Interface field, assign a CLIP interface number.
- Enter the IP address.
- Enter the network mask.
- Select Insert.
- To delete a CLIP interface, select the interface and select Delete.
Circuitless IP Field Descriptions
Use the data in the following table to use the Circuitless IP tab.
|
Name |
Description |
|---|---|
|
Interface |
Specifies the number assigned to the interface. |
|
Ip Address |
Specifies the IP address of the CLIP. |
|
Net Mask |
Specifies the network mask. |
| Name |
Specifies a name assigned to the IPv4 CLIP address. Note:
If you do not assign a name when you
configure virtual NNI links for Multi-Area boundary nodes for VSP 7400
Series, the system autogenerates the name and displays the name as
|
|
IfType |
Specifies the interface type. Note:
Exception: circuitlessIPMAVirtualLinkHome and circuitlessIPMAVirtualLinkRemote applies to VSP 7400 Series only. |